Nine formulas, engineered for every job.
One family of purpose-built cleaning and surface-care products, from a 55-gallon windshield concentrate to an industrial degreaser. Four are shipping now; five are in final formulation. Developed and manufactured in the USA.
VANTAGE™
A hyper-concentrated summer washer fluid. One 16 oz bottle makes 55 gallons, so a single case replaces a pallet of pre-mixed jugs, and clears bug splatter and road film without leaving a streak in low sun.
- Makes up to 55 gallons from one 16 oz bottle
- Cuts bug splatter, road film and pollen haze
- Streak-free drydown, no wiper chatter or glare
- Fill the reservoir roughly two-thirds with clean water.
- Add concentrate at the dilution on the back panel, then top off with water.
- Run the washers for three to four seconds to purge and prime the lines.
VANTAGE GREEN™
Everything VANTAGE does, reformulated on a plant-derived surfactant base. Biodegradable and non-toxic, for fleets and facilities with environmental purchasing standards to meet.
- Plant-derived, biodegradable, non-toxic base
- Same streak-free clarity and concentrate economics
- Built for green purchasing and fleet compliance programs
- Fill the reservoir roughly two-thirds with clean water.
- Add concentrate at the dilution on the back panel, then top off.
- Store above freezing, this is a summer formula, not a de-icer.
FLUSHPOINT™
Most bowl cleaners run straight to the water line and stop working. FLUSHPOINT is a clinging gel delivered through an angled swan neck, it coats under the rim, holds on the porcelain and works on hard-water staining instead of sliding past it.
- Angled under-rim spout reaches the jet holes
- Clinging gel holds on vertical porcelain
- Works on hard-water scale, mineral rings and staining
- Squeeze around the rim so the gel runs down the full bowl.
- Let it dwell, give scale and rings several minutes to soften.
- Brush the bowl and under the rim, then flush.
GRIPSTRIP™
Scraping adhesive is how surfaces get damaged. GRIPSTRIP softens the bond line under label gum, packing tape, decals and price stickers so the residue wipes away, no blade, no gouging, no ghost outline left behind.
- Label gum, packing tape, decals, stickers and mastic
- No scraping and no greasy residue left behind
- Safe on most sealed hard surfaces, spot-test first
- Spray to fully wet the adhesive and let it soak in.
- Give it a minute, let the solvent reach the bond line.
- Wipe with a cloth, then clean the area with soap and water.
PRESSURE 1 CONCENTRATE™
A high-yield pressure-wash concentrate that dilutes up to 20:1, so one gallon covers a season of exterior work. Formulated to run safely through downstream injectors and standard pressure-washer chemical systems.
- Dilutes up to 20:1, one gallon goes a long way
- Siding, decks, fencing, driveways and walkways
- Safe for all pressure washers and downstream injectors
- Dilute to the ratio on the panel for the surface you're washing.
- Apply low-pressure bottom to top and let it dwell.
- Rinse top to bottom at working pressure before it dries.
PRESSURE 1 READY™
The same exterior chemistry as PRESSURE 1 CONCENTRATE, pre-diluted and ready to pour. No measuring, no mixing station, no ratio errors on a crew truck at seven in the morning.
- Pours straight into the tank, zero mixing
- Consistent dilution on every job, every crew
- Siding, decks, fencing, driveways and walkways
- Pour directly into the detergent tank, do not dilute.
- Apply low-pressure bottom to top and let it dwell.
- Rinse top to bottom at working pressure before it dries.
BIN ZERO™
Masking bin odor with fragrance treats the symptom. BIN ZERO foams into the seams and base where the residue actually sits, breaks down the organic film feeding the smell, and rinses out.
- Foaming action clings to bin walls and seams
- Targets the organic residue causing the odor
- Curbside bins, kitchen totes, chutes and dumpsters
- Empty the bin and knock out any loose debris.
- Foam the interior walls, base and lid, then let it dwell.
- Agitate the base with a brush and rinse out.
RUST 86™
Surface rust is what retires a good knife or a seasoned pan early. RUST 86 is a fine-mist treatment for kitchen steel and iron that lifts oxidation off the surface without the aggressive acids that pit the metal underneath.
- Knives, cast iron, bakeware, steel tools and fittings
- Fine mist for controlled, targeted application
- Food-contact safe, rinse and dry thoroughly after use
- Mist the rusted area until evenly wet.
- Let it dwell, then work it with a non-scratch pad.
- Rinse with clean water, dry fully, and re-oil the surface.
SOLV-X™
The workhorse of the line. An industrial-strength degreaser that cuts cooking grease, shop oil, machine film and road grime on the same trigger bottle, range hood to workbench to garage floor.
- Cooking grease, shop oil, machine film and road grime
- Kitchen, shop, garage and equipment surfaces
- Industrial-strength cut in a standard trigger bottle
- Spray directly onto the soiled surface.
- Let it dwell so the formula can break the grease film.
- Wipe with a cloth or pad and rinse where needed.
Not sure which one you need?
Pick the world you work in and we'll show you the formulas built for it.