Home / Industries / Specialty
Industries · Specialty

For the four problems nothing general-purpose solves.

Some soils don't respond to detergent at all. Adhesive, tar, mineral scale and oxidation each need a different mechanism, and using the wrong one usually means damaging the surface while you try.

The insight

Four soils, four mechanisms

Adhesive fails at the bond line, not the surface. That's why scraping does damage, it attacks the substrate instead of the bond. The right approach softens the adhesive until it releases on its own.

Mineral scale is a deposit, not a film. Detergent slides off it. It needs contact time on a vertical surface, which is a delivery problem as much as a chemistry one, hence a clinging gel rather than a liquid.

Oxidation is the surface converting rather than something sitting on it. Aggressive acids will strip it and pit the metal underneath, which is why kitchen steel needs a controlled treatment and a proper rinse-and-oil finish.

Adhesive lifting clean from glass after a GRIPSTRIP soak
GRIPSTRIP™ · In the field
4specialty problem sets
0scraping required
1spot-test, always
What it covers

Specialty applications.

Adhesive

Label gum, packing tape, decals, stickers, protective film and mastic. Softens the bond line so residue wipes off instead of being scraped off a finished surface.

GRIPSTRIP

Tar & Asphalt

Road tar, asphalt spatter and heavy petroleum film on vehicle lowers, plant and equipment. Solvent action first, then degreasing to lift what's left.

GRIPSTRIPSOLV-X

Mineral Scale

Hard-water rings, limescale at the water line and the deposits that build under a rim. Delivered as a clinging gel so it holds contact on vertical porcelain.

FLUSHPOINTRUST 86

Surface Protection

Finishing the job so it stays clean: biodegradable chemistry where run-off matters, and a controlled exterior wash that won't strip or streak the surface underneath.

VANTAGE GREENPRESSURE 1 READY
How to use it

Getting it right on the job.

Test-spraying GRIPSTRIP on a small patch of residue on glass
01

Spot-test

Always test an inconspicuous area first. Specialty chemistry is stronger by definition and finishes vary.

FLUSHPOINT gel clinging to a bowl so it can reach the scale deposit
02

Wet and wait

Fully wet the residue and let the product reach the bond line or deposit. Reapply rather than scrubbing early.

Wiping a stainless surface clean and dry after treatment
03

Neutralise

Wipe, then clean the area with soap and water. On steel, dry fully and re-oil.

The formulas

Built for specialty work.

Products marked “coming soon” are in final formulation and not yet shipping.

Lifts Glue, Tape & Labels
GRIPSTRIP™
12 FL OZ (355 mL) · Trigger Spray
Lifts glue, tape and label residue so it wipes off instead of scraping off.
View product
Coming soon
SOLV-X™
32 FL OZ (946 mL) · Trigger Spray
Industrial-strength degreasing for kitchen, shop and garage.
View product
Clinging Gel Formula
FLUSHPOINT™
24 FL OZ (710 mL) · Clinging Gel
A clinging gel with an angled neck that reaches under the rim and stays put.
View product
Coming soon
RUST 86™
8 FL OZ (237 mL) · Fine Mist
Pulls surface rust off knives, cast iron and bakeware, food-contact safe.
View product
Plant-Derived
VANTAGE GREEN™
16 FL OZ (473 mL) · Concentrate
The same streak-free clarity, built on a plant-derived, biodegradable base.
View product
Coming soon
PRESSURE 1 READY™
1 GAL (3.78 L) · Ready-To-Use
The same exterior clean, pre-mixed, pour it straight into the tank.
View product

Work across more than one of these?

Most operations do. Jump to another industry, or see the full nine-formula line.